Category: Shock Pulse method
- All
- Blog
- Case study
- Media
- News
- Nicht kategorisiert
- Press releases
- Shock Pulse method
- Team
- Technology platform
-
«SPG ensures constant temperatures at the boiler ceiling in the Swiss Krono – Biomass Combustion»
Swiss Krono - a successful manufacturer of MFB boards and OSB boards - uses only natural raw materials that come from sustainably managed forests. In 2002 a biomass combustion plant was put into operation for the energetic utilization of various production waste, dust and bark. -
Boiler fouling cases and the online cleaning systems
Each combustion of organic substances produces particles, which are discharged with the flue gas. These particles, called fly ash, fly through the boiler with the flue gas and settle down on the inner boiler walls and the heat exchanger tubes of the boiler. This results in a reduction of the heat transfer. These contaminants are removed by means of various cleaning systems. The most important automatic online cleaning methods are described below. -
Cleaning systems for convective sections of a waste incineration boiler
High fly ash load in the flue gas of waste and biomass incineration boilers causes deposits on the tube bundle heat exhange surfaces. To meet the boiler efficiency and to maintain the required temperatures of the downstream located plant components, the tube bundles must be cleaned periodically. In order to achieve the most constant possible conditions and for safety reasons, the cleaning should be carried out online during the boiler operation and without any personal intervention in the boiler. The cleaning procedures practiced in the plants are described below. -
Shock Pulse Generators exceed expectations on finned tube ECO cleaning in a biomass boiler
240.000 Tons of natural wood are being processed each year in the biomass boiler located in Nesle (France), where they are being converted into renewable electricity (130 GWh/year), process heat (220 GWh/year) and cooling water (2 GWh/year). The owner AKUO Energy and the operating company CNIM EB hence contribute since 2013 to a reduction of the CO2-emissions of the local industry. -
Shock Pulse Generators (SPGs) in a successful operation for coke industry cleaning bare as well as finned tubes of a high-temperature steam generator
Cokenergy LLC (USA) replaces all the originally installed sootblowers with SPGs for cleaning the Heat Recovery Steam Generators (HRSGs) for the entire sixteen HRSG fleet until the end of 2019. This was decided by the management after completing an evaluation of a 6-month trial run, where the bare as well as the finned tubes were cleaned to satisfaction. -
Excellent operating experience with the Shock Pulse Generators (SPG) in Perlen
Based on the good experience with the Shock Pulse Generators for boiler cleaning in the presently decommissioned waste incineration plant Real in Lucerne/CH, the operator of the new built plant Renergia in Perlen has again installed the SPGs of Explosion Power GmbH for cleaning of the first three boiler passes. Such operate to the full satisfaction of the customer since 2015.